Color Fastness to Water ISO 105 E01 method

Color Fastness to Water ISO 105 E01 method

PURPOSE & SCOPE: This method is used to determine the resistance of the color of textile of all kinds and in all forms to wat... 4:18 AM

• PURPOSE & SCOPE:
  
  
  

This method is used to determine the resistance of the color of textile of all kinds and in all forms to water.

• APPARATUS:
• Perspiration Tester
• Oven
• Multi fiber
• Grey scale
• Color matching cabinet
• Glass plate or Acrylic resin plates
• Weight 12.5 kpa (5 kg)
• Glass beaker
• Petri dish
• Stirring rod

• REAGENTS:

Distilled water or di-ionized water is used in this test method because natural (tap) water is variable in composition.

• SAMPLE PREPARATION:

Cut the specimen and multi fiber at 100 X 40 mm & sewn together for ISO method

• WORKING PROCEDURE:
• Wet in distilled water at room temperature and it will suck water.
• Place it in acrylic resin plates and put the weight on to the plates.
• Keep it I oven and keep the temperature at 37⁰±2⁰C  for 4 hours.
• Open the specimen and dry it in the air hot exceeding 60⁰C

Color Fastness to Wash Test for Textile Testing

Color Fastness to Wash Test for Textile Testing

A specimen of the textile to be tested, with the adjacent fabric attached is subjected to washing under specified conditions. To exte... 4:04 AM

A specimen of the textile to be tested, with the adjacent fabric attached is subjected to washing under specified conditions. To extent of any change in color and that of the staining of the adjacent fabric are assessed and the rating is expressed in fastness numbers.

• REQUIRED MATERIALS:

Following materials required for color fastness to wash test-

• Sample size (40x100 mm)
• Multi fiber (ISO F10 , AATCC APPROVED)
• ECE Detergent (WOB) 4 g/l
• Sodium Perborate 1 g/l
• AATCC 1993 Standard Reference Detergent (WOB) 1 g/l  
• Grade 3 water
• Normal cold water
• Steel balls
• 100% cotton sewing thread.

• REQUIRED INSTRUMENTS:
• Rota wash / Gyro wash
• Scissor
• Sewing machine

• PROCEDURE:
• Cut sample and multi fiber according to ISO 105-C06 or AATCC method.
• Make solution according to buyer or selected standards.
• Prepare beaker and the sample is kept 40⁰C/49⁰C/50⁰C/60⁰C for 30/49 mins in Rota wash/Gyro wash.
• Rinse the sample with cold distilled water then cold normal water.
• Dry the sample at temperature not exceeding 60⁰C.
• After drying the sample assess the shade change and staining.